Headerfoto Earthworks IML

Earthworks IML Serie

Gooseneck Installation Microphones with LumiComm Touch Ring

Engineered to operate remotely with a media control system, integrators have complete freedom to assign function and LED color to the Earthworks LumiComm™ Touch Ring. The IML microphones feature a near-perfect cardioid polar response, a wide frequency response, and an incredibly fast impulse response. What does this mean for your sound? More sonically clear, detailed and intelligible vocals than any other installed sound microphone can deliver.
> 30kHz flat frequency response
> Uniform frequency response on or off axis
> More gain before feedback
> Picks up almost no sound from the rear of the microphone
> Near perfect polar pattern
> Gooseneck allows quick and easy positioning
> Black finish on exposed sections
> Programmable touch sensor output
> Programmable dual-colored LED light ring
> Light ring engineered for a wide supply voltage range.
  (From 7V to 28V regulated supply—No external LED resistors needed)
> Touch sensitive flange that provides a pull down touch sensor output
  (Active Low)
> Light diffuser that houses 10 LEDs providing side illumination (5 Green, 5 Red)
> Current consumption 85mA
> Supplied with either a 5 pin RJ45 connector or a 5 pin Phoenix connector
> Primary applications include teleconferencing, distance learning, surveillance, boardrooms,
  government facilities, and ambient room miking
The narrow usable portion of a conventional microphone’s polar response (with full frequency response) provides only a narrow area that will pick up sounds without high frequency losses at the sides of the microphone. The figures on the left indicate how many conventional microphones it takes to cover a room (with an 8 foot ceiling) and provide the full frequency response of the microphone at the head of a six foot man, in standing position.
The figure on the right shows the much wider polar response (with full frequency response) of Earthworks directional High Definition Microphones™, requiring fewer microphones. In addition you also have more sound level before feedback, no spotlighting or highlighting, more rejection of sounds from the rear of the microphone, in addition to a vastly superior sound quality.









Specifications :

> Frequency Response: 30Hz to 30kHz ±2dB at 12 inches (30.5cm)
> Polar Pattern: Cardioid Sensitivity: 10mV/Pa (-40dBV/Pa)
> Power Requirements: 48V Phantom, 10mA
> Max Acoustic Input: 145dB SPL Output: XLR (pin 2+)
> Output Impedence: 100Ω balanced (50Ω each pins 2 & 3)
> Min Output Load: 600Ω between pins 2 & 3
> Noise: 22dB SPL equivalent (A weighted)

Options :

IML3-B 3″ (76mm) gooseneck, black finish, red & green LEDs, touch sensor output
IML6-B 6″ (152mm) gooseneck, black finish, red & green LEDs, touch sensor output
IML10-B 10″ (254mm) gooseneck, black finish, red & green LEDs, touch sensor output
IML12-B 12″ (305mm) gooseneck, black finish, red & green LEDs, touch sensor output


Drawing :



Dimension drawing :



Downloads :

IML Brochure                                                                 IML Data Sheet

IML Brochure IML Data Sheet



Website manufacturer:

Or like Earthworks Audio on Facebook or follow them on Twitter: